What is Engine Lubrication System?- Types & Uses

What Is Engine Lubrication System?

Engine lubrication system is important for an Automobile Engine, as an Engine consists of various rotating and moving parts, so we need to lubricate it well otherwise they wear and tear out, and we may face Engine breakdown.

Before diving into the Lubrication System, let me give an overview of what is Lubricant and What it should be its property?

A lubricant is an artificial or natural fluid that has high viscosity is greasy and oily. It is used to reduce the friction between the moving parts. It is not only used in the Automobile industry but it is also used in the various fields where we need to reduce the friction between two bodies, however here our main focus is on the Automobile.

In an automobile engine, lubrication is not only used for reducing friction but it is also used for:

  • Absorb Shock.
  • Cleaning of the Engine cylinder.
  • Sometimes used as a coolant.
  • Prevent corrosion.

A lubricant is classified into the following categories:

  • Animal Lubricant
  • Vegetable Lubricant
  • Mineral lubricant
  • Synthetic Lubricant

And finally, let me discuss on the Properties that should have persisted in a Lubricant

A lubricant should have:

  • Must have a high flashpoint. [i.e. it is the temperature where beyond this the lubricant vaporized and burned.]
  • Viscosity should be high. [i.e. it is the attraction force acting between the molecules of the lubricant.]
  • Pour Point. [i.e. it is the lowest temperature where lubricant can flow without any disturbances.]
  • Chemical Stability. [i.e. it should not react with any parts of the engine]

Now get into the Lubrication System in the Automobile.

Engine lubrication system

The lubrication system is one of the most important maintenance operations of motor vehicles.

The absence of this system produces friction between the moving parts, produces a large amount of heat which results in serious problems like scoring of a cylinder, burning of bearings, striking of piston rings, excess fuel consumption, extra.

The main function of the system is to make the easy running of an engine and to reduce the rate of wear and tear on the vehicles.

This system reduces power loss due to friction.

It absorbs the heat from the engine part, thereby acting as a cooling agent in the engine of the vehicle.

It also provides the sealing action between moving parts.

Types of Lubrication System:

The lubrication system can be classified into the following ways:

  1. Petroil system
  2. Splash system
  3. Pressure system
  4. Semi-pressure system
  5. Dry sump system and
  6. Wet sump lubrication system

1. Petroil Lubrication System:

  • This system is generally used in the two-stroke petrol engines like scooters, motorcycles.
  • In this type of system, a certain amount of oil is mixed with petrol itself. therefore 3 to 6% of oil mixed with fuel.
  • This proportion should be proper. If this proportion is less, the danger of oil starvation causes damage to the engine.
  • If this proportion is more, the engine gives dark smoke and excessive carbon deposits on the cylinder head.

2. Splash Lubrication System:

  • This is the most popular type of lubrication system duly used in cars extra.
  • This is one of the cheapest methods of the lubrication system.
  • It consists of a scoop, which is fitted at the lower end of the connecting rod as shown in the diagram.
  • As when the engine runs scoop splashes, the oil from oil through by centrifugal force to all engine parts.

How is Splash Lubrication System Works?

Splash lubrication system is used on small, stationary four-stroke engines.

Related Post :-  What is Jet Engine?- Definition, Types, And Working

In this system, the cap of the big end bearing on the connecting rod is provided with a scoop that strikes and dips into the oil-filled through at every revolution of the crankshaft, and oil is splashed all over the interior of the crankcase into the piston and cover the exposed portion of the cylinder.

A hole is drilled through the connecting rod cap through which the oil passes through the bearing surface.

Oil pockets are provided to catch the splashed oil over all the main bearings and also the camshaft bearings.

From these pockets, oil passes to the bearings through a drilled hole.

The surplus oil dripping from the cylinder flows back to the oil sump in the crankcase.

3. Pressure Lubrication System:

  • This system is used, because the splash system is not sufficient for larger engines like Ambassador, Jeep, Ashok Leyland, and others.
  • Oil from the sump will be supplied to the engine parts through main galleries, via strainer and filter.
  • The pressure of oil is about 2 to 4kg/cm2.
  • For camshaft and timing gears, oil is supplied by a separate line through the pressure-reducing valves.
  • In this type of system, oil is pressurized by using a gear pump

4. Semi-Pressure Lubrication System:

  • In this type of system, the oil pressure is between 0.4 to 1 kg/cm2.
  • In this system, some parts are lubricated by the splash system and some parts are by a pressure system.
  • The parts such as cylinder wall, piston, piston pin, connecting rod extra are lubricated by splash system and remaining parts are by a pressure system.

5. Dry Sump Lubrication System:

This system consists of two pumps.

  • One scavenging pump placed below the sump, other pressure pump placed at the tank.
  • Scavenging pumps supply lubricating oil to the main tank through the filter and, a pressure pump supplies oil to the different parts of an engine through the oil cooler.
  • A dry-sump system gets you a couple of bonuses: First, it means the engine can sit a little lower, which gives the car a lower center of gravity and improves stability at speed.
  • Second, it keeps extra oil from soaking the crankshaft, which can lower horsepower.
  • And, since the sump can be located anywhere, it can also be any size and shape.
  • In this system, the pressure of oil is about 4 to 5 kg/cm2.
  • Here sump is kept dry. Hence called a Dry sump lubrication system.
  • This type of system is used in the sports car, and certain military vehicles extra.
  • In brief, an engine lubrication system in which the lubricating oil is carried in an external tank and not internally in a slump.
  • The sump is kept relatively free from oil by scavenging pumps, which return the oil to the tank after cooling.
  • The opposite of a wet sump system.
  • The pumping capacity of scavenging pumps is higher than that of the engine-driven pumps supplying oil to the system.

6. Wet Sump Lubrication System:

  • In this system, the oil is delivered from the sump strainer to different engine parts.
  • In this system, the pressure of oil is about 4 to 5kg/cm2.
  • After lubrication oil is drawn back to the oil sump.
  • In this case, the oil is always present in the sump.
  • Hence called a wet sump lubrication system.
  • The advantage of a wet sump system is its simplicity. And the oil is close to where it will be used, there aren’t too many parts to engineer or repair, and it’s relatively cheap to build into a car.
Related Post :-  What Is a Crankshaft? | How Crankshaft Works?

FAQs.

What is engine lubrication system?

The job of the lubrication system is to distribute oil to the moving parts to reduce friction between surfaces that rub against each other. The lubrication system used by the Wright brothers is quite simple. An oil pump is located on the bottom of the engine.

What are 2 types of engine lubrication systems?

Types of Engine Lubrication System: Splash System. Pressure system. Dry-Sump System.

What are the types of lubrication system?

There are three different types of lubrication: boundary, mixed and full film. Each type is different, but they all rely on a lubricant and the additives within the oils to protect against wear.

What are the components of a lubrication system?

Oil pan, pickup tube, oil pump, pressure relief valve, oil filter, spurt holes and galleries, and sump.

Why engine lubrication is important?

Lubrication plays a key role in the life expectancy of an engine. Without oil, an engine would succumb to overheating and seizing very quickly. Lubricants help mitigate this problem, and if properly monitored and maintained, can extend the life of your motor.

What is the purpose of lubricating oil system?

The lubrication system of an engine provides a supply of lubricating oil to the various moving parts in the engine. Its main function is to enable the formation of a film of oil between the moving parts, which reduces friction and wear. The lubricating oil is also used as a cleaner and in some engines as a coolant.

What is the name of the lubrication system?

An Automatic Lubrication System (ALS), sometimes referred to as a Centralized Lubrication System (CLS), is a system that delivers controlled amounts of lubricant to multiple locations on a machine while the machine is operating.

What are the 5 functions of the lubrication system?

Its basic functions within an engine include reducing friction, cooling, sealing, cleaning, and serving as protection for moving parts.

What are 3 common lubricants?

There are three main types of lubricants: oil-based, water-based, and silicone-based.

What are the different methods for lubricating an engine?

The most common methods used for lubrication in conventional methods are:

  • Drip oil feed lubrication.
  • Splash oil feed lubrication.
  • Force oil feed lubrication.
  • Grease lubrication.

What are four different types of lubricants?

There are 4 types of lubricants: Oil, Grease, Penetrating Lubricants, and Dry Lubricants. The 2 most common lubricants you’ll be dealing with daily are oil and grease, however, your facility will still be using dry and penetrating lubricants.

How do car lubricants work?

Car lubricants play four major roles – they control friction and wear in the engine, they protect the engine from rusting, they cool the pistons, and they protect the engine oil stored in the sump from combustion gases. Indeed, viscosity is the most significant physical property of a lubricant.

Where is the oil pump?

Oil pumps are usually either inside the oil pan and driven by a camshaft or outside the pan and driven by a crankshaft. When those engine parts start moving, the pump starts working at the same time to pump oil to reduce friction and wear between moving parts and prevent the engine from seizing.

How do engine cylinders get lubricated?

The cylinder walls and piston-pin bearings are lubricated by oil fling dispersed by the rotating crankshaft. The excess is scraped off by the lower ring in the piston. A bleed or tributary from the main supply passage feeds each camshaft bearing.

Related Post :-  Invention Of The Internal Combustion Engine - A Brief History

What is the most common method of lubricating an automotive engine?

An oil film is used between engine parts to reduce friction and wear. Oil reduces the friction between the book and the table. Oil is the most common fluid used to provide lubrication.

What are lubricants Class 8?

Lubricant is a substance used to reduce friction between surfaces in contact which reduces heat generated when the surfaces move. The property of reducing friction between two particles is known as lubricity.

How many types of car lubrication systems are there?

There are mainly three types of Lubrication Systems: Mist lubrication system. Wet sump lubrication system and. Dry-sump lubrication system.

What is engine oil filter?

An oil filter is a filter designed to remove contaminants from engine oil, transmission oil, lubricating oil, or hydraulic oil.

What is 80% of motor oil typically made of?

Base oil makes up nearly 80% of a motor oil formulation and additives make up the remaining nearly 20%. The chemically engineered molecules in synthetic base oil have more uniform properties while the molecules found in conventional base oil differ in shape and levels of impurity.

How do lubricants work?

Lubricants aim at reducing friction between moving pieces and at reducing passive resistance of the stationary parts. They are produced by refining heavy fractions of crude oil (remaining crude oil parts after refining hydrocarbons such as gas, fuel oil or kerosene).

What is PTFE grease?

White-colored grease with PTFE specially formulated for use on most mechanisms: sliding guides, chains, open gears, plain bearings…, used in industry and in particular in the food sector. The presence of PTFE ensures the formation of a dry film. It reduces friction and avoids fouling by solid contaminants.

What are two methods of grease lubrication?

There are three methods of lubricating LM systems: manual greasing using a grease gun or manual pump forced greasing with the aid of an automatic pump, and oil-bath lubrication.

What is the difference between lubricant and oil?

Oil can also be used to lubricate mechanical systems, but contrary to grease and lubricant, you pour the oil into the system, after which it is automatically lubricated. It is therefore important to regularly check the oil of a system and change or replenish it if necessary.

What is used for lubricating?

Typically, lubricants contain 90% base oil (most often petroleum fractions, called mineral oils) and less than 10% additives. Vegetable oils or synthetic liquids such as hydrogenated polyolefins, esters, silicones, fluorocarbons, and many others are sometimes used as base oils.

How is engine oil made?

Lubricating oil is refined from crude oil. After undergoing a purifying process called sedimentation, the crude oil is heated in huge fractionating towers. The various vapors which can be used to make fuel, waxes, or propane, among other substances boil off and are collected at different points in the tower.

How are 4 stroke engines lubricated?

Four-stroke engines are lubricated by oil held in an oil sump. The oil is distributed through the engine by splash lubrication or a pressurized lubrication pump system; these systems may be used alone or together. Splash lubrication is achieved by partly submerging the crankshaft in the oil sump.

What happens if oil pump fails?

A bad oil pump will lose the ability to properly pump oil through your system. This will result in low oil pressure that could lead to further vehicle damage. Increased engine operating temperature.

Leave a Comment