How To Clean Your Tires and Rims?

Proper maintenance of your vehicle’s tires depends upon a regular cleaning regimen. Here’s how to clean tires using a simple, inexpensive process.

Introduction

At the point where the rubber meets the road, your vehicles’ wheels and tires grab a lot of dirt and grime not to mention collecting layers of brake-pad dust and fine shavings from the rotors. Of these, road salt and brake dust represent particularly caustic threats that can pit your wheels and steal life from your tires.

Both tire manufacturers and installers recommend cleaning your tires and wheels at least every other week to keep them looking great and performing their best.

Environmental Tip: You may be tempted to clean your car in the driveway, and we can’t argue the convenience and time savings associated with that. However, car washes are legally required to collect gray water from their washing bays, recycle the water, and dispose of the cleaning agents in the proper way. We recommend working there whenever possible.

Tools Required

  • Bucket
  • Clean & dry towels
  • Hose and spray nozzle
  • Lug-nut brush (optional)
  • Pressure washer (optional)
  • Soft/medium-bristled brush
  • Waxing mitt or foam pads (optional)
  • Wheel brush (optional)

Materials Required

  • Baking soda (for whitewalls only)
  • Dish soap or mild degreaser
  • Warm water
  • Wheel cleaner (optional)
  • Wheel wax (optional)

Hear’s How to clean car Tire Step by Step

1. Prep for the Job

  • Gather all your equipment and materials before starting the job.
  • For the best results when cleaning tires and wheels, work each one through the entire process before moving to the next.
  • Above all, make sure your tires and wheels have cooled before washing them and/or applying any cleaning products.
  • Dedicate a specific cleaning rag and drying towel to this task. As previously mentioned, tires pick up a lot of dirt and grit from the road as well as collecting caustic brake dust. Keep these contaminants away from the other surfaces of your vehicle.

2. Start With a Rinse

  • Rinse off as much loose grime as possible using a spray nozzle or pressure washer.
  • Work the water from several angles and try to remove as much from the interior of the rim as possible.
  • Keep the tire wet as you clean it because the moisture provides lubrication and prevents scratching.
  • Pro Tip: For a deep cleaning or for extremely dirty rims, you may choose to remove the wheel for cleaning. If you do, work from the back of the tire to the front so that rinsing the back doesn’t re-soil the front.

3. Wash the Tire

  • Starting with the tire prevents tire grime from running down over a cleaned wheel face.
  • Scrub the surface of the tire with warm water, a mild detergent and a medium- to soft-bristled brush.
  • Allow the detergent to sit on the tire for a few minutes to soften the grime, then rinse.
  • Repeat scrubbing and rinsing as necessary, being careful to not allow the tire to dry during this part of the process.
  • Always finish by rinsing out the brush.
Related Post :-  Difference Between Tire Balancing and Alignment

4. Wash the Wheel

  • Wet the surface of the wheel.
  • Use the brush to scrub with warm, soapy water.
  • Use any additional brushes to get into tough spots.
  • Repeat wash/rinse as necessary.
  • Thoroughly dry both the tire and the wheel with a cloth.

5. Wax Application (Optional)

  • If you apply wheel wax to your aluminum wheels, plan to do it every three to four months, which may turn your regular cleanings into a simple high-pressure rinse-and-dry process.
  • Apply cream or paste wax with a mitt or foam pad.
    • Defer to the instructions provided on the wheel wax you choose.
  • Remove/finish with a clean cloth.

6. A Final Step for Whitewall Tires

  • Keeping your whitewalls pristine requires an aggressive cleaning routine, including weekly cleanings at minimum that end in this process.
  • Apply a 1-to-1 paste of water and baking soda to the whitewall, then leave it to work for several minutes.
    • Most of the products available to clean the grime from whitewalls actually shorten the life of the tire.
  • Scrub gently with a soft-bristled brush.
  • Rinse.

Now, How To Clean Tire Rims And Wheels

Dirty rims and wheels can take the joy out of any ride.

1. Play It Cool.

Before we start cleaning, make sure your vehicle is completely off and the rims are cool to the touch.

2. Hose ’em Down.

Hose down any large pieces of grit or dirt on the wheels and rims. This will save you some time scrubbing later.

Hand holding hose spraying wheel and rim and hand scrubbing rim with a soapy sponge

3. High-Performance Cleaning.

To create your cleaning solution, fill up a gallon bucket of hot water and add 1 teaspoon of a concentrated dish liquid like Dawn.

4. Start Your Scrubbing.

Use a rag or sponge to clean the outside edge of the rim. Scrub until all the grease has been removed from the metal surface. Next, clean the interior of the rim. Try using an old toothbrush to reach those tough-to-reach spots.

5. Rinse Down.

Rinse out the wheel wells starting from the top to the bottom. This ensures that all the soap is removed. Excess residue may lead to etching on certain materials.

Rinsing tire clean with a hose and drying rim with towel

Related Post :-  When Your Flat Tire May Need to Repair or Replace?

6. Dry Time.

Immediately dry with a soft, clean towel. Now hit the road with your clean rims and wheels.

FAQs.

What can I use to clean tires and rims?

What household items can you use to clean tires?

Use non-abrasive cleaning agents like dish soap, warm water, and wheel wax. If you’re curious about how to clean car tires naturally, try using a 70/30 mix of white vinegar and baking soda.

Can I use Windex on my rims?

Don’t use anything on your wheels that you wouldn’t use on paint. Windex is mainly ammonia, so it shouldn’t harm the clear coat. But it will take off wax.

Can vinegar clean aluminum rims?

Vinegar is also an all-purpose cleaner for aluminum. Pour vinegar on the aluminum rims, and use a sponge or clean towel in a circular motion to polish or clean the aluminum rim. Repeat as necessary.

Can I clean my rims with dish soap?

Get rid of road dirt, grease and tar by using a degreaser and cleaners like dish detergent and baking soda! Mix your dish detergent with equal parts water and clean your rims using a soft cloth.

How do you get stubborn brake dust off rims?

How To Remove Brake Dust from Wheels

  • Make Sure Wheels/Brakes Are Cool to Touch & Out of Direct Sunlight.
  • Rinse Wheels to Remove Heavy Dirt/Contaminants.
  • Choose The Correct Brake Dust Cleaner.
  • Spray Your Wheels with Brake Dust Cleaner and Wait.
  • Gently Scrub Wheel with Soft-Bristle Brush.

Can you clean alloy wheels with wd40?

After washing with detergent and rinsing off, apply Multi-Use Product on a cloth and rub in the product in affected areas. It is a formula that helps to remove grease, oil, and dirt without leaving any residue. It acts immediately on contact and is easy to rinse off.

Can I use glass cleaner on my rims?

You can use a glass cleaner for a tire/wheel cleaner if you use a wheel cleaning brush. It takes the brake dust right off. As with what rooba8 said, wax works well on wheels, but special wheel polishes work even better.

How can I make my tires black but not shiny?

Simple Green and water, a 50/50 mix in a spray bottle. It was cheap and it works well. Wet the tire, spray it on, let it sit for a couple of minutes, scrub with a brush, rinse, let dry. Nice black and natural-looking tires.

Why are my rims Brown?

For those who like their wheels looking spotless, brake dust is the sole bane of their existence. This dust is different from road dirt that your wheels inevitably pick up during the normal course of driving. It’s darker and finer-grained than your garden-variety dirt, often appearing reddish-brown in color.

Related Post :-  What is Tire Rotation?- How to Rotate and Why

Why are my tires turning yellow?

Tires bloom because antiozonant pushes its way to the outer edge of the rubber casing with time. As the element comes into contact with oxygen, it leaves a brown residue on the surface of the tire.

Will vinegar hurt tires?

Not only is Vinegar natural, but it is also non-toxic in nature. It means you won’t be worried about accidentally damaging parts of your car or even your own hands or skin while using vinegar to clean your tires.

Can you use CLR on aluminum rims?

We do not recommend using CLR on a car. The acids in our product should not be used on aluminum or any painted/coated surface. You can safely remove rust from car wheels (if rims are made of chrome or stainless steel only, no alloys).

What can I clean my tires with?

Wash and scrub the tire thoroughly. With your bristled brush, scrub the tire with warm water and dish soap (about a tablespoon of soap per gallon of water). For stuck-on grime, let the soap mixture sit on the tire for a few minutes to help soften things up. Then, repeat scrubbing and rinsing as much as you need.

Can I use Dawn to clean my rims?

Dirty rims and wheels can take the joy out of any ride. Thankfully, cleans everything from baked-on to braked-on messes. So, take a quick pit stop to clean your brake dust and make those tire rims and wheels shine like new.

What is the best thing to clean rims with?

Get rid of road dirt, grease and tar by using a degreaser and cleaners like dish detergent and baking soda! Mix your dish detergent with equal parts water and clean your rims using a soft cloth. Then sprinkle baking soda on the rough side of a sponge and go over your rims again, and finally rinse off.

Can you clean rims with Windex?

Don’t use anything on your wheels that you wouldn’t use on paint. Windex is mainly ammonia, so it shouldn’t harm the clear coat. But it will take off wax.

How do you remove caked on brake dust from rims?

If there’s brake dust on your vehicle’s body, you don’t want to use a cleaner designed for rims. Instead, you want to use a paint-safe iron remover. Iron removers work similarly to Deacon lube. They use catalysts to remove iron deposits, and usually change color when they’re ready to rinse off.

Leave a Comment